Motorola SBG1000 manual Gateway LAN - dhcp server config Page, Gateway LAN - advanced page fields

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Gateway > LAN — dhcp server config Page

Experienced network administrators only can use this page to perform advanced DHCP server configuration:

CAUTION!

Do not modify these settings unless you are an experienced network administrator with strong knowledge of IP addressing, subnetting, and DHCP.

Gateway > LAN — advanced page fields

FieldDescription

LAN IP Address Sets the SBG LAN IP address, in dotted-decimal format. The default is 192.168.0.1. LAN IP Subnet Mask Sets the subnet mask, in dotted-decimal format. The default is 255.255.255.0

Starting IP Address Sets the starting IP address assigned by the SBG1000 DHCP server to clients, in dotted-decimal format. The default is 192.168.0.2.

#of DHCP Users Sets the number of clients for the SBG1000 DHCP server to assign a private IP address. There are 245 possible client addresses. The default is 245.

DHCP Server Lease	Sets the time in seconds that the SBG1000 DHCP server leases an IP address to a client. The
Time	default is 60 seconds.
Domain Name	Sets the domain name for the SBG LAN. The default is None.
Time To Live	Sets the TTL (hop limit) for outbound packets. The default is 64.
Interface Maximum	Sets the SBG LAN MTU, in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Transmission Unit
Apply	Click to apply your changes. SBG1000 reboot required.

X 48 SBG1000 Wireless Cable Modem Gateway User Guide

Home Print Exit