Motorola SBG1000 manual Installation, Before You Begin, Description

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Installation

To install the Motorola SBG1000 Wireless Cable Modem Gateway hardware:

•

•

Determine the type of connections you will make to the SBG1000 — Ethernet, HPNA, wireless, USB, and/or printer

Check that you have the proper cables, adapters, and adapter software to connect to your SBG1000:

—For Ethernet, you’ll need Ethernet cables and network interface cards (NICs) with accompanying installation software.

—For HPNA, you’ll need telephone jumper cables, HPNA interface cards, and the installation software.

—For wireless connections, you’ll need wireless adapters and the installation software for the adapters.

—For USB, you’ll need a USB cable and the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM which contains the software for USB installation.

—For the printer, you’ll need a printer cable.

Before You Begin

Before you begin the installation, check that you received the following items with the Motorola SBG1000 Wireless Cable Modem Gateway:

Item	Description
Power cord	Connects the SBG1000 to the AC electrical outlet
10/100Base-T	Connects to the Ethernet port
Ethernet cable
USB cable	Connects to the USB port
Phone wire jumper	Connects to a telephone line used for the HPNA network
with RJ-11 connectors
Motorola SBG1000	Contains this User Guide and USB drivers
Wireless Cable Modem
Gateway CD-ROM

You will need 75-ohm coaxial cable with F-type connectors to connect the SBG1000 to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a 5-900 MHz RF splitter and two additional coaxial cables to use both the TV and the SBG1000.

X 19 SBG1000 Wireless Cable Modem Gateway User Guide

Home Print Exit