Motorola SBG1000 manual Connecting a PC to the USB Port, Setting Up the Wireless LAN

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless Print Server USB

Connecting a PC to the USB Port

You can connect a single PC running Windows 98, Windows XP, Windows Me, or Windows 2000 to the Motorola SBG1000 Wireless Cable Modem Gateway USB port.

Caution!

Before plugging in the USB cable, be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted in the PC CD-ROM drive.

To connect a PC to the USB port:

1Connect the USB cable to the USB port on the SBG1000.

2Connect the other end to the USB port on the computer.

3Install the USB driver following the appropriate procedure for “Setting Up a USB Driver” on page 95.

Setting Up the Wireless LAN

For information about wireless LAN setup, see “Setting Up the Wireless LAN” on page 67.

Connecting the Printer

Connect the printer to the Motorola SBG1000 Wireless Cable Modem Gateway printer port. If a cable was supplied with the printer, use that cable. Consult your printer documentation to determine cabling requirements from the SBG1000 to the printer.

After connecting the printer, power it on and follow the instructions for “Configuring the Print Server” on page 77.

X 24 SBG1000 Wireless Cable Modem Gateway User Guide

Home Print Exit