HP 7000 dl Router manual Tdm-group group number timeslots 1-24speed 56, Timeslots

SROS Command Line Interface Reference GuideT1 Interface Configuration Command Set

tdm-group <group number> timeslots <1-24>speed [56 64]

Use the tdm-groupcommand to create a group of contiguous DS0s on this interface to be used during the bind process. See crypto map <mapname> on page 731 for related information.

Caution Changing tdm-groupsettings could potentially result in service interruption.

Syntax Description

<group number>	Numerical label to identify the created tdm-group (valid range: 1-255).
timeslots	Keyword to specify the DS0s to be used in this tdm-group.
<1-24>	Specifies the DS0s to be used in the tdm-group. This can be entered as a single
	number representing one of the 24 T1 channel timeslots or as a contiguous group
	of DS0s. (For example, 1-10 specifies the first 10 channels of the T1.)
speed	Optional. Keyword to specify the individual DS0 rate on the T1 interface. If the speed
	keyword is not used, the Secure Router OS assumes a DS0 rate of 64 kbps.
56	Specifies a DS0 rate of 56 kbps.
64	Specifies a DS0 rate of 64 kbps.

Default Values

By default, there are no configured tdm-groups.

Usage Examples

The following example creates a tdm-group (labeled 5) of 10 DS0s at 64 kbps each:

(config)#interface t1 1/1

(config-t11/1)#tdm-group 5 timeslots 1-10 speed 64

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 518