HP 7000 dl Router manual Username username

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

port-auth supplicant enable [username <username> password <password>]

Use the port-auth supplicant enable command to enable supplicant functionality and to specify the username and password used for IEEE 802.1x port authentication. The supplicant is the port that will receive services from the port authenticator.

Syntax Description

enable	Enables supplicant functionality.
username <username>	Specifies the username to use during the authentication process. The default
	username is username.
password <password>	Specifies the password to use during the authentication process. The default
	password is password.

Default Values

By default, this command disabled.

Command Modes

(config-interface)# Ethernet Command Mode

Usage Examples

The following example sets the username to User1 and sets the password to securePass for Ethernet interface 0/2:

(config)#int eth 0/2

(config-eth0/2)#port-auth supplicant enable username User1 password securePass

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 475