HP 7000 dl Router manual Show crypto map, Port number

SROS Command Line Interface Reference Guide Enable Mode Command Set

show crypto map

Use the show crypto map command to display information regarding crypto map settings.

Variations of this command include the following:

show crypto map

show crypto map interface ethernet <slot/port>

show crypto map interface frame-relay <port number> show crypto map interface loopback <port number> show crypto map interface ppp <port number> show crypto map interface vlan <vlan number> show crypto map <map name>

show crypto map <map name> <map number>

Syntax Description

interface	Displays the map settings for the specified interface. Valid interfaces include:
	Ethernet, frame-relay, Frame Relay sublinks, loopback, PPP, or VLAN.
<slot/port>	For Ethernet interfaces, designate the slot and port number.
<port number>	For Frame Relay, loopback, and PPP ports, enter the port number (range is
	1-1024). For Frame-Relay sublinks, the syntax is <port#.sublink#> (range for
	sublinks is 1-1007).
<map name>	Enter a specific crypto map name.
<map number>	Enter a specific crypto map number.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 119