SROS Command Line Interface Reference Guide

Enable Mode Command Set

 

 

Functional Notes

The link-state-id differs depending on whether the link state advertisement in question describes a network or a router.

If describing a network, this ID is one of the following:

The network’s IP address. This is true for type 3 summary link advertisements and in autonomous system external link advertisements.

An address obtained from the link state ID. If the network link advertisement’s link state ID is masked with the network’s subnet mask, this will yield the network’s IP address.

If describing a router, this ID is always the router’s OSPF router ID.

Usage Examples

>enable

#show ip ospf database OSPF router with ID: 0.0.0.0

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

155

Page 155
Image 155
HP 7000 dl Router manual Enable #show ip ospf database Ospf router with ID