HP 7000 dl Router manual Show atm pvc traffic interface atm interface, Pvc, Traffic

SROS Command Line Interface Reference Guide Enable Mode Command Set

show atm [pvc traffic] interface atm <interface>

Use the show atm command to display information specific to the ATM interface.

Variations of this command include the following:

show atm pvc

show atm [pvc traffic] interfaces atm <interface>

Syntax Description

pvc	Shows ATM PVC information.
traffic	Shows ATM traffic information.
<sub-interface number>	For ATM PVC information, enter the sub-interface (x.x) number.
<atm port interface>	For ATM port traffic information, enter the port ATM number 1-1023.
<atm vcl interface>	For ATM VCL traffic information, enter the ATM VCL number 1-1023.1-65536.

Default Values

No default is necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is sample output from this command:

>enable

#show atm pvc interface atm 1.1

			Encap		Peak	Avg/Min	Burst
Name	VPI	VCI	Type	SC	Kbps	Kbps	Cells	Status
atm 1.1	0	200	SNAP	N/A	0	0	0	Active

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 106