Technical Configuration

 

MultiVOIP FXS User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

FXS Loop Start Interface: Parameter Definitions (cont’d)

 

 

Field Name

Values

Description

 

 

Caller ID fields

 

 

 

 

 

 

 

 

Type

Bellcore

The MultiVOIP currently supports only one implementation of Caller ID.

 

 

 

 

That implementation is Bellcore type 1 with Caller ID placed between the

 

 

 

 

first and second rings of the call.

 

 

Enable

Y/N

Caller ID information is a description of the remote calling party received

 

 

 

 

by the called party. The description has three parts: name of caller,

 

 

 

 

phone number of caller, and time of call. The ‘time-of-call’ portion is

 

 

 

 

always generated by the receiving MultiVOIP unit (on FXS channel)

 

 

 

 

based on its date and time setup.

 

 

 

 

In general, the forms of the ‘Caller Name’ and ‘Caller Phone Number’

 

 

 

 

differ depending on the IP transmission protocol used (H.323, SIP, or

 

 

 

 

SPP) and upon entries in the phonebook screens of the remote (CID

 

 

 

 

generating) voip unit. For MVPFXS units, only the SIP-related Caller ID

 

 

 

 

options are available. The CID Name and Number appearing on the

 

 

 

 

phone at the terminating FXS end will come either from a central office

 

 

 

 

switch (showing a PSTN phone number), or the phonebook of the remote

 

 

 

 

(CID sending) voip unit.

 

 

Dialing Options fields

 

 

 

 

 

 

 

 

Regeneration

Pulse, DTMF

Indicates which type of dialing must be regenerated, either pulses or

 

 

 

 

DTMF. For MVPFXS units, DTMF is always used.

 

 

 

 

 

 

 

Inter Digit

1 - 10 seconds

This is the length of time that the MultiVOIP will wait between digits.

 

 

Timer

 

When the time expires, the MultiVOIP will look in the outbound

 

 

 

 

phonebook for the number entered and place the call accordingly.

 

 

 

 

Default = 2.

 

 

 

 

 

 

 

Inter Digit

in milliseconds

The length of time between the outputting of DTMF digits.

 

 

Regeneration

 

Default = 100 ms.

 

 

Timer

 

 

 

 

 

 

 

 

The Caller ID feature has dependencies on both the telco central office and the MultiVOIP phone book. See the diagram series after the FXO Parameters section below.

70

Page 70
Image 70
Multi-Tech Systems MVPFXS-24, MVPFXS-8, MVPFXS-16 manual First and second rings of the call Enable