Multi-Tech Systems MVPFXS-24 Call Signaling Parameter Definitions, Field Name Values Description

MultiVOIP FXS User Guide Technical Configuration

The table below describes all fields in the Call Signaling screen.

		Call Signaling Parameter Definitions
Field Name	Values	Description
SIP Parameters
Signaling Port	numeric	Port number on which the MultiVOIP UserAgent software module will
		be waiting for any incoming SIP requests. Default = 5060
Use SIP Proxy	Y/N	Allows the MultiVOIP to work in conjunction with a proxy server.
Proxy Parameters
Proxy Domain	n.n.n.n	Network address of the proxy server that the voip is using.
Name / IP	where
Address	n=0-255
Append SIP	Y/N	When checked, the domain name of the SIP Proxy serving the MultiVOIP
Proxy Domain		gateway will be included as part of the User ID for that gateway. If
Name in User		unchecked, the SIP Proxy’s IP address will be included as part of the User
ID		ID instead of the SIP Proxy’s domain name.
Port Number		Logical port number for proxy communications.
User Name	Values: alphanumeric
	Description: Identifier used when proxy server is used in network. If a proxy server is
	used in a SIP voip network, all clients must enter both a User Name and a Password
	before being allowed to make a call.
Password	Values: alphanumeric
	Description: Password for proxy server function. See “User Name” description above.
Re-	Values: numeric (in seconds)
Registration	Description: This is the timeout interval for registration of the MultiVOIP with a SIP
Time	proxy server. The time interval begins the moment the MultiVOIP gateway registers
	with the SIP proxy server and ends at the time specified by the user in the Re-
	Registration Time field (this field). When/if registration lapses, call traffic routed
	to/from the MultiVOIP through the SIP proxy server will cease. However, calls in
	progress will continue to function until they end.

73