Multi-Tech Systems MVPFXS-24, MVPFXS-8 Inbound Phone Book Add Entry screen, Field Definitions

MultiVOIP FXS User Guide Phone Book Configuration

Enter Inbound PhoneBook data for your MultiVOIP. The fields of the Inbound Phone Book Add Entry screen are described in the table below.

		Inbound Phone Book Add Entry screen:
			Field Definitions
Field Name	Values		Description
Accept Any	Values: Y/N
Number	Description: When checked, “Any Number” appears as the value in the Remove Prefix field.
	The Any Number feature of the Inbound Phone Book does not work when an external
	routing device is used (Proxy for SIP protocol).
	When no external routing device is used. If Any Number is selected, calls received from
	phone numbers not matching a listed Prefix (shown in the Remove Prefix column of the
	Inbound Phone Book) will be admitted into the voip on the channel listed in the Channel
	Number field. “Any Number” can be used in addition to one or more Prefixes.
Remove Prefix	dialed digits		portion of dialed number to be removed before completing call to destination
Add Prefix	dialed digits		digits to be added before completing call to destination
Channel	1-24, or		Channel number to which the call will be assigned as it enters the local
Number	“Hunting”		telephony equipment . “Hunting” directs the call to any available channel.
	or 1-8
	or 1-16
	depending
	on model
Description	--		Describes the facility or geographical location at which the call originated.
Register with	Y/N		When checked, the value in the Remove Prefix field will be registered with
SIP Proxy	*Must be		the external SIP proxy routing device. The IP address of the external routing
			device must be set in the Phone Book Configuration screen.
	enabled in
			In a SIP voip system, gateways can register with the SIP Proxy.
	Call
	Signaling
	Configuration
	screen.

91