Telephony Interface Parameters

Technical Configuration	MultiVOIP FXS User Guide

The following parameters must be known about the PBX or telco central office equipment to which the analog MultiVOIP will connect:

Phone Parameters

Ask phone company or telecom manager.

#Telephony Interface Parameters:

Record for this VOIP Site

•Which interface type is to be used?

FXS Loop Start only

•If FXS, determine whether the line will be used for a phone, fax, KTS (key telephone system), or perhaps serve a station card on a PBX.

Type of Configuration	MultiVOIP	Info	Info
Info Gathered	Configuration	Obtained	Entered
	screen on which	√	√
	to enter the Info
IP Info for voip unit	IP Parameters
● IP address
● Gateway
● DNS IP (if used)

Interface Type	Interface
(FXS only * )	Parameters.
*In FXO/FXS systems,
channels used for phone,
fax, or key system are
FXS; channels used for
analog PBX extensions or
analog telco lines are
FXO.

Country Code	Regional
	Parameters

Reminder: Be sure to Save & Apply after entering configuration values.