Multi-Tech Systems MVPFXS-8 manual Regional Parameter Definitions Field Name Values Description

MultiVOIP FXS User Guide Technical Configuration

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	Australia,	Name of a country or region that uses a certain set of tone pairs for
Region	Central America,	dial tone, ring tone, busy tone, unobtainable tone (fast busy tone), and
	Chile, Europe,	re-order tone (a tone pattern indicating the need for the user to hang
	France, Japan,	up the phone).
	UK, USA,	In some cases, the tone-pair scheme denoted by a country name may
	Custom	also be used outside of that country. The “Custom” option (button)
		assures that any tone-pairing scheme worldwide can be
		accommodated.
Standard Tones fields
Type column	dial tone,	Type of telephony tone-pair for which frequency, gain, and cadence
	ring tone,	are being presented.
	busy tone,
	unobtainable
	tone (fast busy),
	survivability
	tone,
	re-order tone
Frequency 1	freq. in Hertz	Lower frequency of pair.
Frequency 2	freq. in Hertz	Higher frequency of pair.
Cadence	n/n/n/n	On/off pattern of tone durations used to denote phone ringing,
(msec) On/Off	four integer time	phone busy, connection unobtainable (fast busy), dial tone (“0”
	values in	indicates continuous tone), survivability, and re-order. Default
	milli-seconds;	values differ for different countries/regions. Although most
	zero value for	cadences have only two parts (an “on” duration and an “off”
	dial-tone	duration), some telephony cadences have four parts. Most cadences,
	indicates	then, are expressed as two iterations of a two-part sequence.
	continuous tone	Although this is redundant, it is necessary to allow for expression of
		4-part cadences.
Gain 1	gain in dB	Amplification factor of lower frequency of pair.
	+3dB to –31dB	This applies to the dial, ring, busy and ‘unobtainable’ tones that the
	and “mute”	MultiVOIP outputs as audio to the FXS or FX0 port. Default: -16dB
	setting
Gain 2	gain in dB	Amplification factor of higher frequency of pair.
	+3dB to –31dB	This applies to the dial, ring, busy, and ‘unobtainable’ (fast busy)
	and “mute”	tones that the MultiVOIP outputs as audio to the FXS or FXO port.
	setting	Default: -16dB

75