Additional printer setup

Installing internal options

Accessing the system board to inst all internal options

CAUTION—SHOCK HAZARD: When accessing the system bo ard, turn the printer off, and then unplug the power
cord from the wall outlet before continuing . If you have other devices attached to the printer, then turn them
off as well and unplug any cables going to the printer.
1As you face the printer, the system board door is on the right side. Open the system board door.
2Use the following illustration to locate the appropriate connector.
Warning—Potential Damage: System board electronic components are easily damaged by static electricit y.
Touch a metal surface on the printer be fore touching any system board electronic c omponents or connectors.
1USB port
2Parallel connector
3Memory card connector
Additional printer set up
33