HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 659

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

backup force <state>

Use the backup force command to manually override the automatic backup feature. This can be used to force a link into backup to allow maintenance to be performed on the primary link without disrupting data. Use the no form of this command to return to the normal backup operation state.

Syntax Description

<state>	Selects the forced backup state of the sub-link.
backup	Force backup regardless of primary link state
primary	Force primary link regardless of its state

Default Values

By default, this feature is disabled.

Command Modes

(config-fr 1.16)#	Virtual Frame Relay Sub-Interface Configuration Mode
(config-atm 1.1)#	ATM Sub-Interface Configuration Mode

Usage Examples

The following configures the Secure Router OS to force this endpoint into backup:

(config)#interface atm 1.1 (config-atm 1.1)#backup force backup

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 659