HP 7000 dl Router manual Debug radius, #debug radius

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug radius

Use the debug radius command to enable debug messages from the RADIUS subsystem. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug radius messages show the communication process with the remote RADIUS servers.

Usage Examples

The following is an example output for the debug radius command:

>enable

#debug radius

RADIUS AUTHENTICATION: Sending packet to 172.22.48.1 (1645).

RADIUS AUTHENTICATION: Received response from 172.22.48.1.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 93