HP 7000 dl Router manual Clear lldp counters interface interface

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear lldp counters interface <interface>

Use the clear lldp counters interface command to reset all LLDP packet counters to 0 for a specified interface.

Syntax Description

<interface>	Clears the information for the specified interface. Type clear lldp counters
	interface ? for a complete list of applicable interfaces.

Default Values

No default values are necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example resets the counters on a PPP interface:

>enable

#clear lldp counters interface ppp 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 41