HP 7000 dl Router manual Copy source destination, #copy myfile.biz newfile.biz

SROS Command Line Interface Reference Guide Enable Mode Command Set

copy <source> <destination>

Use the copy command to copy any file from a specified source to a specified destination.

Syntax Description

<source>	Specifies the current location of the file.
	Valid sources include: running-config(current running configuration file),
	startup-config(configuration file located in NVRAM), or a filename (located in
	FLASH memory).
<destination>	Specifies the destination of the copied file.
	Valid destinations include: running-config(current running configuration file),
	startup-config(configuration file located in NVRAM), or a filename (located in
	FLASH memory).

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following provides various sample copy commands:

>enable

Creates a copy of the file myfile.biz (located in FLASH memory) and names it newfile.biz:

#copy myfile.biz newfile.biz

Creates a backup copy of the startup configuration file (and places in FLASH memory):

#copy startup-config backup.bak

Copies the current running-configuration file to the startup configuration file located in NVRAM:

#copy running-config startup-config

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 54