HP 7000 dl Router manual Event-history on, Config#event-history on

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

event-history on

Use the event-history on command to enable event logging for the Secure Router OS system. Event log messages will not be recorded unless this command has been issued (regardless of the event-history priority configured). The event log may be displayed using the show event-historycommand. Use the no form of this command to disable the event log.

Syntax Description

No subcommands.

Default Values

By default, the Secure Router OS event logging capabilities are disabled.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

The event history provides useful information regarding the status of the system and individual port states. Use the event history as a troubleshooting tool when identifying system issues. The following is a sample event history log.

#show event-history

Using 526 bytes

2002.07.12 15:34:01 T1.t1 1/1 Yellow

2002.07.12 15:34:01 INTERFACE_STATUS.t1 1/1 changed state to down. 2002.07.12 15:34:02 T1.t1 1/1 No Alarms

2002.07.12 15:34:02 INTERFACE_STATUS.t1 1/1 changed state to up. 2002.07.12 15:34:03 INTERFACE_STATUS.eth 0/1 changed state to up. 2002.07.12 15:34:10 OPERATING_SYSTEM Warm Start 2002.07.12 15:34:12 PPP.NEGOTIATION LCP up

2002.07.12 15:34:12 PPP.NEGOTIATION IPCP up

Usage Examples

The following example enables the Secure Router OS event logging feature:

(config)#event-history on

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 235