HP 7000 dl Router manual Config-hdlc 1#hold-queue

SROS Command Line Interface Reference Guide HDLC Command Set

hold-queue <queue size> out

Use the hold-queuecommand to change the overall size of an interface's WAN output queue.

Syntax Description

<queue size>	The total number of packets the output queue can contain before packets are
	dropped. Range: 16-1000.

Default Values

The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay round-robin is 200.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example sets the overall output queue size to 700:

(config)#interface hdlc 1

(config-hdlc 1)#hold-queue 700

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 823