HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 256

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

Caution	Before applying an access control policy to an interface, verify your Telnet connection will
	not be affected by the policy. If a policy is applied to the interface you are connecting
	through and it does not allow Telnet traffic, your connection will be lost.

Step 4:

Apply the created access control policy to an interface. To assign an access policy to an interface, enter the interface configuration mode for the desired interface and enter access policy <policy name>. The following example assigns access policy MatchAll to the Ethernet 0/1 interface:

(config)#interface ethernet 0/1 (config-eth0/1)#access-policy MatchAll

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 256