HP 7000 dl Router manual Remote-alarm rai, Rai

SROS Command Line Interface Reference Guide T1 Interface Configuration Command Set

remote-alarm [rai]

The remote-alarmcommand enables transmission of a remote alarm. Use the no form of this command to disable all transmitted alarms.

Syntax Description

rai	Choose to send a remote alarm indication (RAI) in response to a loss of frame.
	This also disables a received RAI from causing a change in interface operational
	status.

Default Values

The default for this command is rai.

Command Modes

(config-t1 1/1)# T1 interface configuration mode.

Usage Examples

The following example enables transmission of RAI in response to a loss of frame:

(config-t1 1/1)#remote-alarm rai

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 514