HP 7000 dl Router manual Aaa processes threads, Config#aaa processes

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

aaa processes <threads>

Use the aaa processes command to set the number of threads available to the AAA subsystem. Use the no form of this command to return to the default setting. For more detailed information on AAA functionality, refer to the Technology Review section of the command aaa on on page 206.

Syntax Description

<threads> Enter the number of threads available to the AAA subsystem. Range: 1-64.

Default Values

By default, this is set to 1 process.

Command Modes

(config)# Global Configuration Mode

Functional Notes

Increasing this number may speed up simultaneous authentication at the cost of system resources (e.g., memory).

Usage Examples

The following example specifies five available threads for the AAA subsystem:

(config)#aaa processes 5

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 209