HP 7000 dl Router manual Bridge group# protocol ieee, Config#no bridge 17 protocol ieee

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

bridge <group#> protocol ieee

The bridge protocol ieee command configures a bridge group for the IEEE Spanning Tree Protocol. Use the no form of this command (with the appropriate arguments) to delete this setting.

Syntax Description

<group#>	Bridge group number (1 to 255) specified using the bridge command
ieee	IEEE 802.1 Ethernet spanning-tree protocol

Default Values

By default, all configured bridge interfaces implement ieee spanning-tree protocol.

Command Modes

(config)# Global Configuration Mode

Usage Examples

The following example deletes the bridge protocol setting for bridge-group 17:

(config)#no bridge 17 protocol ieee

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 211