SROS Command Line Interface Reference Guide

Ethernet Interface Configuration Command Set

 

 

lldp receive

Use the lldp receive command to allow LLDP packets to be received on this interface.

Syntax Description

No subcommands.

Default Values

By default, all interfaces are configured to send and receive LLDP packets.

Command Modes

(config-interface)#

Ethernet Command Mode

Usage Examples

The following example configures Ethernet interface 0/1 to receive LLDP packets: (config-eth 0/1)#lldp receive

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

471

Page 471
Image 471
HP 7000 dl Router manual Lldp receive