HP 7000 dl Router manual Configure

SROS Command Line Interface Reference Guide Enable Mode Command Set

configure

Use the configure command to enter the Global Configuration Mode or to configure the system from memory. See Global Configuration Mode Command Set on page 200 for more information.

Syntax Description

terminal	Enter the Global Configuration Mode.
memory	Configure the active system with the commands located in the default
	configuration file stored in NVRAM.
network	Configure the system from a TFTP network host.
overwrite-network	Overwrite NVRAM memory from a TFTP network host.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example enters the Global Configuration Mode from the Enable Command Mode:

>enable

#configure terminal (config)#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 53