SROS Command Line Interface Reference Guide

DHCP Pool Command Set

 

 

lease <days> <hours> <minutes>

Use the lease command to specify the duration of the lease for an IP address assigned to a Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this command to return to the default lease value.

Syntax Description

<days>

Specifies the duration of the IP address lease in days.

<hours>

Optional. Specifies the number of hours in a lease. You may only enter a value in

 

the hours field if the days field is specified.

<minutes>

Optional. Specifies the number of minutes in a lease. You may only enter a value

 

in the minutes field if the days and hours fields are specified.

Default Values

By default, an IP address lease is one day.

Command Modes

(config-dhcp)#

DHCP Pool

Usage Examples

The following example specifies a lease of 2 days:

(config)#ip dhcp-server pool MyPool (config-dhcp)#lease 2

The following example specifies a lease of 1 hour:

(config)#ip dhcp-server pool MyPool (config-dhcp)#lease 0 1

The following example specifies a lease of 30 minutes:

(config)#ip dhcp-server pool MyPool (config-dhcp)#lease 0 0 30

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

365

Page 365
Image 365
HP 7000 dl Router manual Lease days hours minutes, Config#ip dhcp-server pool MyPool config-dhcp#lease