SROS Command Line Interface Reference Guide

DDS Interface Configuration Command Set

 

 

clock rate <rate>

Use the clock rate command to configure the data rate used as the operating speed for the interface. This rate should match the rate required by the DDS service provider. Use the no form of this command to return to the default value.

Syntax Description

<rate>

Configures the operating speed used for the interface

auto

Automatically detects the clock rate and sets to match

bps56k

Sets the clock rate to 56 kbps

bps64k

Sets the clock rate to 64 kbps

Default Values

<rate>auto

Command Modes

(config-dds 1/1)# 56K/64K (DDS) Interface Configuration Mode required

Functional Notes

When operating at 64 kbps (clear channel operation), the DTE data sequences may mimic network loop maintenance functions and erroneously cause other network elements to activate loopbacks. Use the data-coding scrambled command to prevent such occurrences. See data-coding scrambled on page 489 for related information.

Usage Examples

The following example configures the clock rate for 56 kbps operation:

(config)#interface dds 1/1

(config-dds 1/1)#clock rate bps56k

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

487

Page 487
Image 487
HP 7000 dl Router manual Clock rate rate, Config#interface dds 1/1