SPANNING TREE ALGORITHM (STA)
STA Port Configuration
The following figure and table describe STA configuration for ports or modules.
Parameter | Default | Description |
Fast | Enabled | See “Fast Forward” in this table. |
Forwarding |
|
|
Mode |
|
|
(All Ports) |
|
|
Priority | 128 | Defines the priority for the use of a port in the STA |
|
| algorithm. If the path cost for all ports on a switch is the |
|
| same, the port with the highest priority (i.e., lowest value) |
|
| will be configured as an active link in the spanning tree. |
|
| Where more than one port is assigned the highest |
|
| priority, the port with lowest numeric identifier will be |
|
| enabled. |
|
| The range is 0 - 255. |
