SMC Networks 1000BASE-X manual Port Configuration, See Flow Control Status in this table

WEB-BASED MANAGEMENT

Port Configuration

Use the Port Configuration menu to configure any port on the switch.

Parameter	Default	Description
Flow Control	Disabled	See “Flow Control Status” in this table.
Mode
(on all ports)
Admin Status	Enable	Allows you to disable a port due to abnormal
		behavior, and then re-enable it after the problem
		has been resolved. You may also disable a port
		for security reasons.
Duplex Status	100M	Used to set the current port speed and duplex
	Full-Duplex	mode.
		The MT-RJ ports have a default setting of
		100 Mbps full duplex. Auto-negotiation is the
		default setting for 1000BASE-T, 1000BASE-SX
		and 1000BASE-LX; but is not available for
		100BASE-FX.

3-46