CONFIGURING BRIDGE MIB EXTENSIONS
Configuring Bridge MIB Extensions
The Bridge MIB includes extensions for managed devices that support Traffic Classes and Virtual LANs. To display and configure these extensions, use the Bridge Extension screen as shown below:
Bridge Capability
Parameter | Description |
Extended Multicast | This switch does not support filtering of individual multicast |
Filtering Services* | addresses based on GMRP (GARP Multicast Registration |
| Protocol). |
Traffic Classes | This switch provides mapping of user priorities to multiple |
| traffic classes. (Refer to the Priority menu on page |
Static Entry Individual | This switch enables static filtering for unicast and multicast |
Port | addresses. (Refer to the Address Table Configuration on |
| page |
VLAN Learning | This switch uses Shared VLAN Learning (SVL), where the |
| VLAN filtering database is shared among all ports. |
Configurable | This switch allows you to override the default PVID (Port |
PVID Tagging | VLAN ID) assigned to untagged incoming frames under |
| VLAN Port Configuration on “VLAN Port Configuration” |
| on page |
Local VLAN Capable* A local bridge (that is, dedicated Spanning Tree) is applied to each individual VLAN.
* These functions are not available for the current firmware release.
