MAIN MENU
Main Menu
Using the
Menu | Description |
System | Provides basic system description, including contact information. |
Switch | Shows hardware/firmware version numbers, power status, and |
| expansion modules in use. |
IP | Includes boot state, IP address, and the maximum number of Telnet |
| sessions allowed. |
SNMP | Configures communities, trap managers; and activates traps. |
Security | Sets password for system access. |
Upgrade | Downloads new version of firmware to update your system. |
Configure | Saves the switch configuration to a file on a TFTP server. |
Address | Provides full listing of unicast addresses, sorted by address or |
Table | VLAN. |
STA | Enables Spanning Tree Algorithm; also sets parameters for switch |
| priority, hello time, maximum message age, and forward delay; as |
| well as port priority and path cost. |
Bridge | Displays/configures extended bridge capabilities for this switch, |
Extension | including for traffic classes and VLAN extensions. |
Priority | Configures default port priorities and displays queue assignments. |
VLAN | Configures VLAN group members and other |
| settings. |
IGMP | Configures IGMP multicast filtering. |
Port | Enables any port, sets communication mode to auto- negotiation, |
| full duplex or half duplex, enables/disables flow control, configures |
| broadcast control and port security. |
Mirror | Sets the source and target ports for mirroring. |
Trunk | Specifies ports to group into aggregate trunks. |
Statistics | Displays statistics on network traffic passing through the selected |
| port. |
