U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-62

802.1Q VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q

VLAN features.

802.1Q VLAN Port Configuration : Unit 1 Port 1 - 12
===============================
Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type Filtering Status Registrations PDU Origin
---------------------------------------------------------------------
1 1 All FALSE DISABLED 0 00-00-00-00-00-00
2 1 All FALSE DISABLED 0 00-00-00-00-00-00
3 1 All FALSE DISABLED 0 00-00-00-00-00-00
4 1 All FALSE DISABLED 0 00-00-00-00-00-00
5 1 All FALSE DISABLED 0 00-00-00-00-00-00
6 1 All FALSE DISABLED 0 00-00-00-00-00-00
7 1 All FALSE DISABLED 0 00-00-00-00-00-00
8 1 All FALSE DISABLED 0 00-00-00-00-00-00
9 1 All FALSE DISABLED 0 00-00-00-00-00-00
10 1 All FALSE DISABLED 0 00-00-00-00-00-00
11 1 All FALSE DISABLED 0 00-00-00-00-00-00
12 1 All FALSE DISABLED 0 00-00-00-00-00-00
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
PVID The VLAN ID assigned to untagged frames received
on this port.
Acceptable
Frame Type*
This switch accepts “All” frame types, including VLAN
tagged or VLAN untagged frames. Note that all VLAN
untagged frames received on this port are assigned to
the PVID for this port.
Ingress Filtering* If set to “True,” incoming frames for VLANs which do
not include this ingress port in their member set will be
discarded at the ingress port.
* These controls do not affect VLAN independent BPDU frames, such as GVRP
or STP. However, they do affect VLAN dependent BPDU frames, such as
GMRP.