USING THE SYSTEM CONFIGURATION PROGRAM
Displaying System Information
Use the System Information screen to display descriptive information about the switch, or for quick system identification as shown in the following figure and table.
| System Information | |
| ================== | |
System Description | : TigerStack 100 | SMC6924MT |
System Object ID | : 1.3.6.1.4.1.202.20.6 | |
System Up Time | : 48067 (0 day, 1 hr, 2min, 34 sec) | |
System Name | : DEFAULT SYSTEM | NAME |
System Contact | : DEFAULT SYSTEM | CONTACT |
System Location | : DEFAULT SYSTEM | LOCATION |
<APPLY> | <OK> | <CANCEL> |
Use <TAB> or arrow keys to move, other keys to make changes. | ||
|
|
|
Parameter | Description |
System Description | System hardware description. |
System Object ID | MIB II object identifier for switch’s network |
| management subsystem. |
System Up Time | Length of time the current management agent has |
| been running. (Note that the first value is 1/100 |
| second.) |
System Name* | Name assigned to the switch system. |
System Contact* | Contact person for the system. |
System Location* | Specifies the area or location where the system |
| resides. |
*Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to browse the whole string.
