SMC Networks 1000BASE-X manual Configuring the Serial Port, Parameter Default Description

MANAGEMENT SETUP MENU

Configuring the Serial Port

You can access the on-board configuration program by attaching a VT100 compatible device to the switch’s serial port. (For more information on connecting to this port, see “Required Connections” on page 1-2.) The communication parameters for this port can be accessed from the Serial Port Configuration screen shown below and described in the following table.

	Serial Port Configuration
	=========================
	Management Mode	: CONSOLE MODE
	Baud rate	:	19200
	Data bits	:	8
	Stop bits	:	1
	Parity	:	NONE
	Time-Out (in minutes)	:	10
	Auto Refresh (in seconds) :		5
<APPLY>	<OK>		<CANCEL>
Use <TAB> or arrow keys to move. <Space> to scroll options

Parameter	Default	Description
Management	Console	Indicates that the console port settings are for
Mode	Mode	direct console connection.
Baud rate	19200	The rate at which data is sent between devices.
		Options : 2400, 4800, 9600, 19200 and auto
		detection.
		Note that when Auto is selected, you need to first
		press the Enter key once to set the data rate and
		initialize the connection.
Data bits	8 bits	Sets the data bits of the RS-232 port.
		Options : 7, 8
Stop bits	1 bit	Sets the stop bits of the RS-232 port.
		Options : 1, 2

2-17