Silex technology SX-500-1402 Chapter Advanced Configuration, Factory Default Settings, Cts/Rts

Chapter 5

Advanced Configuration

The Serial Device Server Serial Device Server is equipped with a default configuration that works with most serial-to-Ethernet connections. You can modify the settings to suit your installation requirements.

The web browser interface is the recommended method for setting advanced configuration parameters. However, regardless of the method to access the configuration parameters, the method for modifying the parameters is virtually identical.

Factory Default Settings

Table 3 displays the serial port configuration parameter descriptions and settings with the default settings indicated in a separate column.

Table 3 Factory Default Settings

Parameter

Description

Settings

Default Setting

Character	Bits per character	7, 8	8
Flow	Flow control	None, XON, XOFF,	None
		CTS/RTS
Parity	Parity	None, Even, Odd,	None
		Mark, Space
Speed	Baud rate of bits per second	300, 600,1200, 2400,
		3600, 4800, 7200,	115200
		9600, 14400,19200,
		38400, 57600, 76800,
		115200, 230400,
		460800, 921600
Stop	Stop bits per character	1, 2	1
Ecaddr	ECable destination IP address	Set by user	N/A
Econn	ECable connection attempt time	1-255 seconds	30 seconds
Ecport	ECable destination TCP port number	Set by user	N/A
Eclport	ECable destination local IP port	Set by user	N/A
Page 26	Silex		Advanced Configuration

Part Number 140-00188-210A