Silex technology SX-500-1402 manual SET NW Inap PAPMSCHAPV2, SET NW Realm

Command

Description

SET NW INAP	Sets EAP inner-authentication protocol
	The possible protocols are PAP and MSCHAP_V2; the default value is PAP.
	Format:
	SET NW INAP	[PAPMSCHAP_V2]
SH NW INAP	Shows the inner authentication mode
	The deprecated command SH NW TTAP also returns this data.
	Sample output:
	Authentication protocol = PAP
SET NW REALM	Sets the realm portion of the 802.1x EAP authentication ID
	This value can also be set with the ID command.
	The default value is null.
	Format:
	SET NW REALM	<realm>
SH NW REALM	Shows the realm associated with the authentication ID, if applicable.
	The default value is null (blank) string.
	The deprecated command SH NW TTRE also returns this data.
	Sample output:
	Somewhere
SET NW	Enable or disable WPA group key mode.
WPAGROUP	If enabled, group keys can be used for data link encryption.
	The default value is disabled.
	Sample output:
	SET NW WPAGROUP [ENABLE DISABLE]
	NOTE: For FIPS 140-2 approved operation, this parameter must
	be DISABLED.
SH NW	Shows state of WPA auto connect flag
WPAAUTO	Sample output:
	WPA-AUTO Enabled
SH NW	Shows state of the allow WPA group keys flag
WPAGROUP	Sample output:
	WPA-GROUP Disabled.
SET NW WPAPSK	Sets WPA PSK pass phrase or hex key.
	This value is only used if the authentication mode is WPA-PSK or WPA2-PSK. The
	argument to this command is exactly 64 hex characters representing the 256 bit PSK
	value.
	Format:

SET NW WPAPSK <key>

Console Commands	Silex	Page 45
	Part Number 140-00188-210A