Declaration of Conformity (FCC) (SX-500)
According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:
We: | Silex Technology America, Inc. |
Located at: | 157 West 7065 South |
| Salt Lake City, UT 84047, USA |
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device FOR HOME OR OFFICE USE. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: | silex |
|
Type of Product: | Ethernet and Wireless 802.11b and | |
Model: |
| |
Silex Technology America, Inc. hereby declares that the equipment specified above conforms to the above requirements.
Standards used and met in the assessment:
CFR Title 47, Part 15, Subpart B and Subpart C; EN55022: 1998 Class B
FCC ID: N6C-SX10WG
Information for Canadian Users (IC notice) (SX-500)
The term “IC” before the radio certification number only signifies that Industry of Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus meets all requirements of the Canadian
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment that is installed outdoors is subject to licensing.
This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen than the equivalent isotropically radiated power (EIRP) is not more than the required for successful communication.
Safety and Regulatory Notices | Silex | Page 63 |
| Part Number |
|
