WEB-BASED MANAGEMENT

Parameter

Default

Description

 

Path Cost

100/19/4

This parameter is used by the STA algorithm to

 

 

determine the best path between devices. Therefore,

 

 

lower values should be assigned to ports attached to

 

 

faster media, and higher values assigned to ports with

 

 

slower media.

 

 

 

The default and recommended range is:

 

 

Standard Ethernet:

100 (50~600)

 

 

Fast Ethernet:

19 (10~60)

 

 

Gigabit Ethernet:

4 (3~10)

 

 

The full range is 1 - 65535.

 

 

Note: Path cost takes precedence over port priority.

Fast Forward Enabled

This enables/disables Fast Forwarding for the selected

 

 

port. In this mode, ports skip the Blocked, Listening and

 

 

Learning states and proceed straight to Forwarding. Fast

 

 

Forwarding enables end-node workstations and servers

to overcome time-out problems when the Spanning Tree Algorithm is implemented in a network. Therefore, Fast Forwarding should only be enabled for ports that are connected to an end-node device.

3-28

Page 122
Image 122
SMC Networks 1000BASE-X manual Forwarding enables end-node workstations and servers