CONFIGURING VIRTUAL LANS
VLAN Port Configuration
Use this screen to configure
Parameter | Description |
PVID | The VLAN ID assigned to untagged frames received on this |
| port. Use the PVID to assign ports to the same untagged |
| VLAN. |
Acceptable Frame | This switch accepts “All” frame types, including VLAN |
Type | tagged or VLAN untagged frames. Note that all VLAN |
| untagged frames received on this port are assigned to the |
| PVID for this port. |
Ingress Filtering | If set to “True,” incoming frames for VLANs which do not |
| include this port in their member set will be discarded at the |
| inbound port. |
GVRP Status* | Enables or disables GVRP for this port. When disabled, any |
| GVRP packets received on this port will be discarded and |
| no GVRP registrations will be propagated from other ports. |
| Note that GVRP must be enabled for the switch before this |
| setting to take effect. (See “Configuring Bridge MIB |
| Extensions” on page |
GVRP Failed | The total number of failed GVRP registrations, for any |
Registrations* | reason, on this port. |
GVRP Last PDU | The Source MAC Address of the last GVRP message |
Origin* | received on this port. |
* GVRP is not available for the current firmware release.
