P
ANEL
D
ISPLAY
3-5Console Configuration

If you are having difficulties making an out-of-band console connection to

the serial port on the agent module, you can display or modify the current

settings for the serial port through the Web agent. Click on the serial port

icon in the switch image to display or configure these settings, as shown

below.

Speed Status Indicates the current port speed.
Duplex Status Indicates the port’s current duplex mode.
Flow Control Status Shows the flow control type in use. Flow control can
eliminate frame loss by “blocking” traffic from end stations
connected directly to the switch.
VLAN The VLAN ID assigned to untagged frames received on this
port. Use the PVID to assign ports to the same untagged
VLAN.
Parameter Default Description
Baud rate 19200 bps The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200, and auto
detection.
Note that when AUTO is selected, you need to
first press the Enter key once to set the data rate
and initialize the connection.
Time-Out 10 minutes If no input is received from the attached device
after this interval, the current session is
automatically closed.
Range : 0 - 100 minutes; 0: disabled
Parameter Description