USING THE SYSTEM CONFIGURATION PROGRAM
Parameter | Description |
Default Gateway | Gateway used to pass trap messages from the system’s agent |
| to the management station. Note that the gateway must be |
| defined if the management station is located in a different IP |
| segment. The default value is null. |
IP State | Specifies whether IP functionality is enabled via manual |
| configuration, or set by Boot Protocol (BOOTP). Options |
| include: |
| |
| default or user specified IP Configuration. (This is the |
| default setting.) |
| BOOTP Get IP - IP is enabled but will not function until a |
| BOOTP reply has been received. BOOTP requests will be |
| periodically broadcast by the switch in an effort to learn its |
| IP address. (BOOTP values can include the IP address, |
| default gateway, subnet mask, and TFTP server IP.) |
