System Information
Use the System Information screen to display descriptive information about the switch, or for quick system identification as shown in the following figure and table.
Parameter | Description |
System Name* | Name assigned to the switch system. |
IP Address | IP address of the agent you are managing. The agent |
| supports SNMP over UDP/IP transport protocol. In this |
| environment, all systems on the Internet, such as network |
| interconnection devices and any PC accessing the agent (or |
| running EliteView) must have an IP address. Valid IP |
| addresses consist of four decimal numbers, 0 to 255, |
| separated by periods. Anything outside of this format will |
| not be accepted by the configuration program. |
Object ID | MIB II object identifier for switch’s network management |
| subsystem. |
Location* | Specifies the area or location where the system resides. |
Contact* | Contact person for the system. |
System Up Time | Length of time the current management agent has been |
| running. |
*Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to browse the whole string.
