C
ONFIGURING
THE
SWITCH
2-57802.1Q VLAN Current Table Information
This screen shows the current port members of each VLAN and whether
or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if
you just want to create a small port-based VLAN for one or two switches,
you can assign ports to the same untagged VLAN. The current
configuration is shown in the following screen.
MAX Supported VLANs Maximum number of VLANs that can b e configured
on this switch.
Current Number of
VLANs Configured
The number of VLANs currently configured on this
switch.
Parameter Description
Deleted VLAN Entry
Counts
The number of times a VLAN entry has been deleted
from this table.
VID The ID for the VLAN currently displayed.
Parameter Description
802.1Q VLAN Current Table Information
=====================================
Deleted VLAN Entry Counts : 0
VID Creation Time Status
--------------------------------------------------
1 0 (0 day 0 hr 0 min 0 sec) Permanent
Unit Current Egress Ports Current Untagged Ports
1. 111111111111 111111111111 ---- 111111111111 111111111111 ----
2. ------------ ------------ ---- ------------ ------------ ----
3. ------------ ------------ ---- ------------ ------------ ----
4. ------------ ------------ ---- ------------ ------------ ----
5. ------------ ------------ ---- ------------ ------------ ----
6. ------------ ------------ ---- ------------ ------------ ----
Sorted by VID : 1
[Show] [More]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.