SMC Networks 1000BASE-X manual As shown in the following example

		MONITORING THE SWITCH
Menu	Description
Status	The status for an entry can be set to:
	Permanent	This entry is currently in use and
		will remain so after the next reset
		of the switch.
	DeleteOnReset	This entry is currently in use and
		will remain so until the next reset.
	Invalid	Removes the corresponding entry.
	DeleteOnTimeOut	This entry is currently in use and
		will remain so until it is aged out.
		(Refer to “Aging Time” on page
		2-71.)
	Other	This entry is currently in use but
		the conditions under which it will
		remain so differ from the
		preceding values.
Sorted by	Selects the primary sort key for displaying table entries.
	Note that only VID+MAC is implemented in the
	current firmware release.
[Show]	Displays the static address table sorted on VID as the
	primary key and MAC address as secondary key.
[More]	Scrolls through entries in the static address table.
[Set]	Adds the specified entry to the static address table, such
	as shown in the following example:

VID	: 1		MAC :	00-00-00-e8-34-22
Unit	:	1	Port:	1
Status	:	Permanent

2-75