| CONFIGURING THE SWITCH | |
|
| |
Parameter | Description |
|
FlowControl InUse | Shows the flow control type in use. Flow control can |
|
| eliminate frame loss by “blocking” traffic from end | |
| stations connected directly to the switch. Back | |
| pressure is used for half duplex and IEEE 802.3x for | |
| full duplex. Note that flow control should not be used | |
| if a port is connected to a hub. | |
Speed and Duplex InUse | Displays the current port speed and duplex mode | |
| used. (Note that | |
| ||
|
|
|
Page 51
Image 51
