| CONFIGURING THE SWITCH | |
|
| |
Parameter | Description |
|
Port | Numeric identifier for switch port. | |
Default Ingress User | Default ingress priority can be set to any value from | |
Priority | 0~7, where 0~3 specifies the low priority queue and | |
| 4~7 specifies the high priority queue. | |
Number of Egress Traffic | Indicates that this switch supports two priority output | |
Classes | queues. |
|
802.1p Port Traffic Class Information
This switch provides two priority levels with Weighted Fair Queuing for port egress. This means that any frames with a priority tag from 0~3 are sent to the low priority queue “0” while those from 4~7 are sent to the high priority queue “1” as shown in the following screen.
802.1P Port Traffic Class Information : Unit 1 Port 1 - 12
=====================================
Port |
| User Priority |
|
| |||
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
2 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
3 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
4 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
5 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
6 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
7 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
8 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
9 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
10 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
11 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
12 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE> Use <TAB> or arrow keys to move, other keys to make changes.
Parameter | Description |
Port | Numeric identifier for switch port. |
User Priority | Shows that user priorities 0~3 specify the low priority |
| queue and 4~7 specify the high priority queue. |
