CONFIGURING VIRTUAL LANS

VLAN Current Table

This screen shows the current port members of each VLAN and whether or not the port supports VLAN tagging. Ports assigned to a large VLAN group that crosses several switches should use VLAN tagging. However, if you just want to create a small port-based VLAN for one or two switches, you can assign ports to the same untagged VLAN. The current configuration is shown in the following screen.

Parameter

Description

VLAN Entry Delete

The number of times a VLAN entry has been deleted from

Count

this table.

VLAN ID

The ID for the VLAN currently displayed.

Up Time

The value of System Up Time (sysUpTime) when this

at Creation

VLAN was created.

Status

Shows how this VLAN was added to the switch.

 

Dynamic GVRP: Automatically learned via GVRP.

 

Permanent: Added as a static entry.

 

(Note that GVRP is not supported by the current firmware

 

version.)

3-35

Page 129
Image 129
SMC Networks 1000BASE-X manual Vlan Current Table