Paradyne 6341, 6301, 6342, 6371 Using the List Command, Changing the System Identity, List config

2. Accessing the DSL Router

Using the List Command

The list command displays a sequence of commands in the form of ASCII strings that would have the effect of setting all configuration settings to the current values. Secure information such as passwords and login IDs are not displayed.

To determine the commands available, enter Administrator configuration mode and type either:

￿list

Displays the output in on-screen page mode. In on-screen page mode, the user interface displays 23 lines of information. When the 24th line is reached, More... appears. Pressing any key displays the next page.

￿list config

Displays the output in scroll mode as a text file. Scroll mode captures and displays all command strings in a text file for use with a terminal emulation program. Refer to Appendix D, DSL Router Terminal Emulation.

Changing the System Identity

The System identity is the same as the MIB entry of sysName. The sysContact and sysLocation MIB entries are not displayed.

Procedure

To change System identity from the factory default of CUSTOMER>:

1.Log in and enter ADMIN-configuration mode.

2.At the CUSTOMER-CONFIG#>prompt, type the new System identity (no spaces allowed) and press Enter. Then type save and press Enter.

system identity new system identity

For example:

system identity PARADYNE save

In this example, after saving the entry and ending configuration mode, the

System identity will display:

PARADYNE#>

Refer to Exiting from the System on page 2-7to end configuration mode.

2-6 November 2003 6300-A2-GB20-10