A. Command Line Interface

Table A-9. NAT Commands (3 of 4)

nat basic map public-ip private-ip

nat basic map lower-public-ip lower-private-ip upper-private-ip

Minimum Access Level: Administrator

Command Mode: Config

Statically maps public to private IP addresses for the one-to-one mapping function of Basic NAT. In the first command, a single address pair is mapped. In the second command, a range of IP addresses will be contiguously mapped starting at the pair defined by the lower-public-ipand lower-private-ipargument. A maximum of 64 static mappings can be created.

Example: nat basic map 192.128.1.1 10.1.3.2

public-ip– IP address of the public address space which is to be mapped to the IP address of a local host.

private-ip– IP address of a local host which is to be mapped to an IP address in the public IP address space.

lower-public-ip– Lowermost IP address of a range of public addresses which are to be mapped to a range of IP addresses of local hosts.

lower-private-ip– Lowermost IP address of a range of local host IP addresses which are to be mapped to a range of IP addresses in the public IP address space.

upper-private-ip– Uppermost IP address of a range of local host IP addresses which are to be mapped to a range of IP addresses in the public IP address space.

nat basic delete private-ip

nat basic delete lower-private-ip upper-private-ip

Minimum Access Level: Administrator

Command Mode: Config

In the first command, the command deletes static mapping entry associated with the specified one-to-one mapping of Basic NAT. In the second command, a range of mappings will be contiguously deleted starting at the pair defined by the lower-private-ipand ending with the upper-private-ipargument.

Example: nat basic delete 192.128.1.1

private-ip– Statically mapped IP address of the local host.

lower-private-ip– Lowermost IP address of a range of local host IP addresses which are to be deleted.

upper-private-ip– Uppermost IP address of a range of local IP addresses which are to be deleted.

nat napt delete {udp tcp} port

Minimum Access Level: Administrator

Command Mode: Config

Deletes static mapping entries which identify a local server.

Example: nat napt delete tcp 102

udp, tcp – Specify the protocol used, User Datagram Protocol or Transmission Control Protocol.

port – The protocol port number associated with the local server.

6300-A2-GB20-10

November 2003

A-13

Page 87
Image 87
Paradyne 6371, 6341, 6301, 6342, 6351 Table A-9. NAT Commands 3, Nat basic delete private-ip, Nat napt delete udp tcp port